SAP 연동을 하면서 반복되는 오류 메시지를 확인하기 위한 자료
SAP과 연동 시 나오는 메시지를 아래에서 코드로 찾아보면 된다.
클래스 코드인가 class xxx 식으로 나온다.
패스워드 관련 오류를 제일 많이 봤던 거 같다.
이 아래 접은 글 내용은 검색을 통해서 타고 타고 가다가 우연히 보게 되어 스크랩했었다.
(진짜 급하게 스크랩함)
자주 업무 참고 할 사람들을 위해 공개한다~ㅋ
001 &1&2&3&4&5&6&7&8
002 Enter a valid value
003 Message with maximum length and maximum variable parts: & & & & 1234*
004 Memory consumption display switched on
005 Memory consumption display switched off
006 &1 read (&2 lines)
007 &1 is empty
008 Too many nested system menus
009 Incorrect index for screen save stack
010 Error during semaphore operation: &
011 Decimal places are not permitted
012 All buffers were reset
013 Menu transaction cannot be called via transaction parameter
014 Error generating screen texts
015 Field value is negative (sign cannot be displayed)
016 Too many nested subscreens
017 Invalid data type for field &3 on screen &1 &2
018 COMMIT successful
019 Error in SSTEP loop definition -> (screen error)
020 The field value is too large and cannot be displayed
021 The field is too short
022 Storage chain destroyed by RSTG function
023 Incorrect call of RSTG
024 Roll area too small
025 RSTG chain damaged
026 MAIN step EOD missing -> (screen error)
027 The ABAP/4 field data type is incorrect
028 With bit strings, only '0' and '1' are allowed
029 Error loading screens: No end label
030 & not allowed in subscreens (screen: & &)
031 Transaction & is unknown
032 The ABAP/4 field is too short
033 Debugging mode is on
034 Transaction & is locked
035 Unable to set parameter (ID &, length &)
036 Cannot reset the entry
037 Saving not possible (check the key fields)
038 The screen cannot be saved
039 Screen generation & &: Incorrect DYNP version
040 Error in 'Waiting for RFCDIA'
041 Syntax error in screen & &
042 Data has been reset
043 Program error with EXIT FROM LOOP: No loop active
044 & buffer reset
045 Program "&": Screen source "&" is missing
046 Error loading screen source: & &
047 Screen & & could not be generated
048 Screen comparison & &: incorrect ABAP timestamp
049 Mo message ID defined for module pool &
050 Error formatting terminal data, transaction terminated
051 More than 1 selection field is set
052 Enter a numeric value
053 Invalid SAPGUI logon data
054 Check time format
055 Fill in all required entry fields
056 Too much data held (execute "Delete Data")
057 Entry & & & exists (entry is correct)
058 Entry & & & does not exist in &4 (check entry)
059 The entry value is too large (max. 255)
060 Table & does not exist in screen & &
061 The input value is too large (max 32767)
062 CALL SCREEN not allowed in subscreens (program error)
063 Screen & & must be an Include screen (screen error)
064 Invalid date
065 Enter date in the format &
066 Screen & & must not be an Include screen
067 The RAW field is too long (it cannot be displayed)
068 Error in the hexadecimal input: odd number of digits
069 Specify time within permitted value range
070 Incorrect hexadecimal digit
071 Function TESTEN DYNPRO not currently possible (try again)
072 Memory low. Leave the transaction before taking a break!
073 Set SCREEN_COMPRESS &1
074 Screen display in file &1.
075 No matchcode selection was made
076 HOLD_MODE &1, trace_id: &2
077 Input field contains prohibited characters. (Already replaced)
078 DFIES data incorrect in field &-&
079 Internal error with matchcode selection (notify person responsible)
080 Conflict check &
081 Nested call of PERFORM ON COMMIT: & & & &
082 Cannot display screen with plug-ins
083 CALL SUBSCREEN: & & &
084 Invalid field format (screen error)
085 COMMIT WORK during ON COMMIT or ON ROLLBACK
086 ROLLBACK WORK during ON COMMIT or ON ROLLBACK
087 Entered value is too large (Max = 2147483647)
088 Input must be in the format &
089 Entry too long (enter in the format &)
090 Screen & & is too large
091 You cannot specify the codepage & in SAPLogon
092 Entry is too long for the field
093 Data was set
094 Data was held
095 No field was set
096 No field was held
097 Internal table & does not exist or is empty
098 Program error with LOOP AT int. tab: FROM greater than TO
099 Field after FROM, TO or CURSOR has incorrect data type
100 Program error with LOOP AT internal table: FROM larger than table end
101 Batch input: Processing mode 'Display errors only' activated
102 Batch input: Processing mode 'Process visibly' activated
103 Int. table & without header line not supported with LOOP AT itab
104 Transaction was exited with function key F3, F12 or F15
105 Transaction restarted by user
106 Error reading log file &
109 No CHECK type checkbox found
110 Use the most recent SAPGUI version
111 List extract can not be fully displayed
112 Control & & does not exist
113 Tab title pushbutton & not assigned to an area
114 Tab control not supported by SAPgui
115 Tab & has no active buttons
116 Controls active, cannot resume
117 Function code of pushbutton & is invalid
118 Screen output area too small
119 Protected tab titles are not supported (tab & title &)
120 Table Control &: More than the specified & columns were referenced
121 SAP GUI does not support strings (variable length types)
122 Invalid GUI output data: &1
123 Invalid GUI input data: &1
124 Configuration not possible due to pending entries
125 No field defined for the function code
126 Specify positive values only
127 This function is not possible
128 Screen error during matchcode processing (notify person responsible)
129 Matchcode object not specified
130 Current RFC connection does not permit you to execute this function
131 "Skip Initial Screen" is not permitted for transaction &
132 Function not possible in update debugging
133 Function not possible in background debugging
134 Maximum number of sessions reached
135 Maximum number of sessions reached in the system
136 Value of SET PARAMETER ID & has the length 0
137 Logons from external user authentication are generally rejected
138 Logons from X.509 client certificate are generally rejected
139 This system does not let you log on using a password
140 This system rejects all logons using SSO tickets
141 The system is unable to interpret the SSO ticket received
142 Cannot check issuer of SSO ticket
143 Issuer of SSO ticket is not authorized
144 System received an expired SSO ticket
145 This SSO ticket has already been used (security protection)
146 Error in configuration of SAP logon tickets
147 Assertion ticket received is not meant for this system
148 User account not in validity date
149 No authorization for object &
150 You are not authorized to use function &
151 Program error. Please notify the person responsible
152 Name or password is incorrect (repeat logon)
153 Enter a new password
154 No valid license installed (no logon possible)
155 User already logged on at another terminal
156 Log on with a dialog user
157 User not authorized. Session terminated
158 User is locked. Please notify the person responsible
159 The logon language does not match system code page &
160 Auth. check > Long text (tr. & object &)
161 CPIC is not allowed in this system
162 >>>>>>>>>>> & &
163 Client & is not available in this system
164 Error creating authorization buffer (notify the person responsible)
165 Maximum number of users in the system reached
166 The client is currently locked against logon
167 Screen &1: DDIC structure &2 was modified during the run
169 License expiration date: & (in & days)
170 No logon possible (no hw ID received by mssg server)
171 Select one of the installed languages
172 You are not authorized to use Transaction &
173 Enter first and last name
174 No authorization to open the X.25 connection
175 Logon refused (license has expired)
176 Logon refused (license data improperly modified)
177 Logon refused (valid license not installed)
178 Logon refused (license key invalid)
179 Logon not possible (error in license check)
180 You can change your password only once a day
181 The new and old passwords must have at least & different characters
182 The initial password has expired (request a new one)
183 Choose another password (this password is invalid)
184 The passwords specified must be identical
185 Use only characters from the 'syntactical character set'
186 New password cannot begin with '?' or '!'
187 Password is not long enough (minimum length: & characters)
188 The first three characters of the password must all be different
189 The first three characters must not be part of the user name
190 You can no longer change the password
191 Program error occurred (notify SAP)
192 Password changed
193 Choose a password that is different from your last & passwords
194 Password is in exception table
195 The input field contains prohibited characters (already deleted)
196 No valid GUI codepage for language & (system codepage &)
197 You have no password; you cannot log on using a password
198 This operation was canceled because the user has no password
199 You have no authorization to administer passwords remotely for user &1
200 Password logon no longer possible - too many failed attempts
201 Exit status unknown (abend)
202 CALL SCREEN (not modal) in modal dialog box not allowed
203 Debugging is only possible with a "Dialog" type user
204 Presentation ended
205 Error in APPC CONN headers
206 Invalid log version
207 APPC connection type '&' not supported
208 &
209 Error creating APPC message
210 Error in APPC message
211 No CUA area available
212 Connection terminated
213 CPIC server sending screen & &. Cancelled
214 Error in RCUI slave. A start UI mode/BI mode is missing
215 Error in RCUI slave. ThCtrlGetInBuf ends with rc=&
216 Error in RCUI slave. Internal buffer for data is too small
217 Error in the RCUI Slave. Error while receiving GUI data
218 & is not currently supported
219 ABAP variable & does not exist
220 ABAP table & does not exist
221 Communication terminated
222 Gateway memory bottleneck
223 Connection to a CPIC program terminated (read failed)
224 CPIC program connection ended (write error)
225 Unknown CPIC function
226 Invalid conversation ID
227 SAP gateway process terminated
228 Storage error in SAP gateway
229 Storage error in SAP gateway
230 No free connection available. Please try again later
231 No free SAP gateway processes. Please try again later
232 Failed to start SAP gateway process (gwwp)
233 Incorrect communication type
234 Failed to establish connection to CPIC program
235 Connection no longer exists in internal connection table
236 SAP gateway connection failed. Is SAP gateway started?
237 Connection to SAP gateway terminated (Is SAP gateway closed?)
238 SAP gateway communication error (Is SAP gateway closed?)
239 SAP gateway communication error (Is SAP gateway closed?)
240 Invalid length (check parameters)
241 Function is invalid in this environment
242 Timeout during connection setup. Please check partner availability
243 Failed to connect to SAP system (parameters exist?)
244 Connection closed by partner
245 Insufficient gateway memory (Try again later)
246 Incorrect version of CPIC program (check the installation)
247 Remote or local gateway not running, Note 1138406
248 Failed to read table TXCOM.
249 Active connection table is full. Please try again later
250 No CUA area available
251 No storage of class SHORT available
252 Entry cannot be selected
253 Invalid OK command
254 Invalid menu code
255 Function code cannot be selected
256 Choose a valid function
257 No menu entries found
258 Unknown event
259 DB cursor cannot be set
260 Invalid "fastpath"
261 Storage area for GUI status & & too small
262 No status entry found for $ $
263 CUA: (Function sets missing)
264 Status &2 of the user interface &1 missing
265 CUA: (F keys missing)
266 CUA: (F keys missing)
267 CUA: (Texts missing)
268 CUA: (Set of active functions missing)
269 Help function is only active after logon
270 A status cannot be set in a sub-screen. (Screen : & &)
271 No memory available for CUA interface
272 Insufficient memory: Include menu & & cannot be included
273 & is not defined in the profile
274 Error in call parameters
275 Unable to reconnect from &1 to &2
276 DB connection to replacement DB server initialized
277 Error in call DB_FUNCTION
279 Password cannot be longer than 8 char. and cannot contain lower case
280 The password must contain at least & digits (0-9)
281 The password must contain at least & letters (A-Z, a-z)
282 The password must contain at least & special characters
283 The password must contain at least & lowercase characters (a-z)
284 The password must contain at least & uppercase characters (A-Z)
285 Service request not possible, function module &1 not available
286 ABAP table & cannot be extended
287 Set parameter ID &... is too long
288 Internal memory overflow at set parameter ID &
289 System error "&" received in RCUI slave
290 Enter your old password
291 Your password has been deactivated
292 Password rules have been tightened; change of password required
293 Both passwords must be identical
294 The entered password is not downward compatible (see long text)
295 Communication error, Transaction &, Number in folder &
296 Service request not possble, method &1=>&2 not available
297 Field & changed: & (previously: &)
298 Formatting error in the field &; see next message
299 Could not release folder &, since it still contains a background job
300 Session & is being processed by user & in mode & on server &
301 Position the cursor on a line in the list
302 Invalid date &
303 You cannot process more than one session with this function
304 & session(s) deleted &
305 & session(s) & &
306 No session found with status "New" or "Error"
307 Error in & of session & &
308 The batch input session is empty
309 The requested session cannot be processed
310 Choose a processing type
311 & session(s) selected
312 The requested session is locked
313 & session(s) and log(s) deleted &
314 & is not currently supported
315 & logs were deleted
316 Screen source not available: & &
317 Unable to read log list
318 Log list is empty
319 Unable to find log list &
320 Session destroyed, cannot be processed
321 & logs were selected
322 Session & is being processed by user &
323 You cannot process more than one log with this function
324 No log exists
325 No log list available
326 Session & released for processing
327 Status cannot be changed
328 The required block does not exist
329 &, create session .&. not allowed, as last session is still active
330 &, session not opened
331 &, internal data area for screen .&1&2. too small
332 &, queue error at &. Please check the system log
333 &, client .&. is invalid
334 &, group .&. is invalid
335 &, lock date .&. is invalid
336 &, user .&. is invalid
337 &, destination .&. is invalid
338 &, Transaction code .&. is invalid
339 &, screen .&&. is invalid
340 Batch input queue error. Please check the system log
341 Runtime error & has occurred
342 Batch input internal error. Please check the system log
343 Cursor field &1&2 does not exist in the screen
344 No batch input data for screen & &
345 Processing of batch input session completed
346 Field name & not valid in the batch input data
347 Field &1&2 is not an input field
348 Field &1&2 input value is longer than screen field
349 Field &1&2 does not exist in the screen &3 &4
350 Input value for OK code is too long
351 & session contents passed to spool & for printing
352 "LEAVE TO TRANSACTION" & is not allowed in batch input
353 Session & cannot be protected (error in locking operation)
354 OK code & is not allowed in batch input
355 Transaction was processed successfully
356 Transaction was deleted from batch input session
357 Transaction error
358 Field &1&2 not found in loop of screen &3 &4
359 The transaction was terminated by the user
360 Queue error, function: & RC & SQL-RC &
361 Error in transaction data
362 Error in screen data
363 & transactions read
364 & transactions processed
365 & transactions with errors
366 & transactions deleted
367 Screen deleted from batch input session
368 &1 &2
369 Screen is not required
370 Processing statistics
371 Length error in transaction data
372 Length error in screen data
373 Update error, transaction &, no. in session &
374 &, separation indicator .&. is invalid
375 &, field table is invalid
376 &, no transaction created yet
377 Update error, transaction &
378 Start screen does not exist in batch input data
379 Screen & & is too large for internal batch input area
380 Processing not possible (session is locked)
381 Batch input session deleted
382 Batch input processing ended
383 Batch input processing cancelled
384 Start of session reached
385 End of session reached
386 Log for session & deleted
387 Error deleting log &
388 & session(s) transferred to background processing
389 No authorization for reorganizing sessions and logs
390 Unable to schedule session &.
391 No authorization for processing session & online
392 No authorization for processing session & in background
393 No authorization for release of session &
394 No authorization for locking/unlocking session &
395 No authorization for deleting session &
396 No authorization for analyzing session &
397 Batch input is not active
398 & & & &
399 Batch input: Unknown return code
400 No free dialog process available
401 Maximum number of internal sessions reached
402 Error establishing CPIC connection
403 Eye catcher of the number range buffer corrupted
404 Error setting up a remote session
405 Active program is being terminated (please wait)
406 Active program could not be terminated
407 You cannot take over another user's session
408 Old session could not be adopted
409 Position the cursor on a column
410 Function not currently supported
411 Maximum number of sessions reached
412 Session & is still active
413 Session & already exists
414 Sessions locked for users
415 Invalid session no. &
416 Session & does not exist
417 No sessions available. User may have been deleted
418 TSKH
419 Work process & locked ( & )
420 Work process & released ( & )
421 Roll-free error
422 Pag-free error
423 Shared memory error
424 Semaphore lock error
425 Semaphore release error
426 Roll-in error
427 Session ended
428 Reserved for task handler
429 Log off via the System menu or by entering /nend in the command field
430 Timeout for setting up an asynchronous dialog
431 Invalid output to terminal from background processing
432 No authorization for user administration
433 No authorization for process/program administration
434 No authorization for update administration
435 &1&2&3
436 The host name cannot contain blanks
437 The host name is too long (max. length: & bytes)
438 There is already an entry with host name &
439 Save your data or cancel
440 Unpermitted data volume received
441 CPIC function not allowed
442 Timeout during connection setup
443 Failed to connect to SAP system
444 Connection terminated
445 No memory available
446 Update debugging only possible in same client
447 No authorization for administering the number range buffer
448 No error found in number range buffer check
449 Number range buffer error corrected
450 No memory available
451 Failed to open side information file (check the installation)
452 Communication system error (tp_start function failed)
453 Conversation not initialized (CMINIT/CMACCP called?)
454 Communication system error: getlu failed. Is LU correct?
455 System call error: signal function failed
456 Timeout during connection setup (check that partner exists)
457 Communication system error (allocate failed). Please check partner
458 Communication system error: send failed
459 Communication system error: prepare failed
460 Communication system error: flush failed
461 Communication system error (Receive failed, partner ended?)
462 No argument for ACCEPT in argument vector
463 Communication system error: remote allocate failed
464 Communication system error: deallocate failed
465 Communication system error: tp_end failed
466 Max. number of connections reached. Retry later
467 Communication system error: snaopen failed. Check LU
468 Communication system error: snactl failed
469 No flush on IBM
470 Communication system error: snaclse failed
471 CPIC status error (check CPIC program)
472 No side info entry found (check side info or destination)
473 No conversation found. Check conversation ID
474 Connection deleted by administrator
475 Time limit exceeded, connection terminated
476 No partner program found (check installation)
477 Communication system error: confirm failed
478 Communication system error: confirmed failed
479 No value for GWHOST side info entry (check side info)
480 No value for GWSERV in side info entry (check side info)
481 No value for PROTOCOL in side info entry (check side info entry)
482 No value for LU in side info entry (check side info)
483 No value for TP in side info entry (check side info)
484 SAP gateway connection failed. Is SAP gateway started?
485 System call error: gethostname failed. Please check installation
486 Function SAP_CMACCP has not yet been executed
487 No program name found in argument vector
488 No host found in argument vector
489 No service found in argument vector
490 No conversation ID found in argument vector
491 Invalid parameter value
492 Communication system error: function LU62CVCT failed
493 Communication system error: function LU62ATTCH failed
494 No CPIC conversion table found
495 Error in CPIC conversion table
496 Error in modification values for CPIC conversion table
497 Unable to determine host address: NiHostToAddr failed
498 Unable to determine host from address: NiAddrTo Host failed
499 THOST table read failed
500 Entry & in work area & with language key & not supported
501 Job & is not currently scheduled
502 No log entries exist for job &
503 Log for job & cannot be &
504 Recording for job & deleted
505 Choose a processing option
506 Choose one object type only
507 Choose a job first
508 No job matches the selection criteria
509 No log exists for job &. Check the system log
510 Job log list cannot be read
511 Jog log list is empty
512 Log entries were deleted for background job &
513 Failed to fetch parameter &
514 No background jobs are scheduled
515 Job sends screen & &
516 Job started
517 Job finished
518 Job cancelled
519 Position the cursor on a valid line
520 No entries available
521 No log entries exist for job &
522 There are currently no schedules due for release
523 Schedule for job & has already been released
524 Schedule for job & released
525 Start date is in the past
526 Job & is already finished
527 Job & is already active
528 You are not authorized to display the selected jobs
529 The description of step & cannot be read
530 Previous job & does not exist
531 Specify a complete start time/date
532 Specify only one start time/date
533 You have no & authorization for the steps of job &
534 Job & is currently active, so the selected function cannot be performed
535 "LEAVE TO TRANSACTION" is not allowed in a background job
536 & of job log failed
537 Job log is &
538 Specify a previous job
539 Specify a start time/date
540 Choose only one start time/date
541 Program & does not exist
542 Specify a program
543 Test: TBTCR updated
544 Test: SY-BATCH indicates background processing
545 Test: SY-BATCH indicates no background processing
546 Job & is currently being edited. Repeat &
547 Job & has now been deleted
548 & of job & failed. Incorrect lock operation
549 Job & is flagged as 'not executable'
550 Step & started (program &, variant &, user ID &)
551 Selected job contains no steps
552 Select an appropriate job
553 The selected job contains no variants
554 Job also cancelled due to process termination. See the system log
555 Program & cannot be scheduled
556 Job & was &
557 You have no & authorization for job &. Please see the system log
558 Error at & of job &. Please see the system log
559 Internal error at & of job &. Please see the system log
560 Logon of user & in client & failed when starting a step
561 Job & is not periodic
562 Job & contains no &
563 Select an appropriate previous job
564 Job cancelled after system exception ERROR_MESSAGE
565 Job & contains only one step (delete the entire job)
566 Specify a time frame
567 No authorization for displaying the job log for the selected job
568 No list exists for job &
569 Flagged jobs deleted
570 & jobs have been flagged again (total flagged: &)
571 Only 1 job was flagged again (total flagged: &)
572 Job & contains no steps
573 No authorization for displaying lists from the selected jobs
574 Job cancelled due to system shutdown
575 & jobs have been deleted
576 Of the & jobs selected, & were not deleted
577 Selected list no longer exists in the spool
578 Internal report for job & has already been deleted
579 No list exists for the selected step
580 Total & & &
581 & & deleted
582 & & could not be deleted
583 No & were selected
584 Block marking has begun
585 Flags deleted during Goto
586 The scheduling of job & was saved
587 Batch request for job & failed. Please see the system log
588 Deatils about latest start date are not complete
589 Latest start date is before the start date
590 Latest start date and start date are more than 1 year apart
591 Invalid variant &
592 No authorization for displaying authorizations of user &
593 At the start of a job step: Unable to set the code page (language)
594 Job &1 (ID number &2) terminated [User &4:&3]
595 500-599 reserved for batch processing
596 500-599 reserved for batch processing
597 500-599 reserved for batch processing
598 500-599 reserved for batch processing
599 500-599 reserved for batch processing
600 Failed to insert update header
601 Failed to read update header
602 Dump in update
603 Commit during update start failed
604 Failed to read update module header
605 Failed to change update module header
606 Memory error during update
607 No access to working memory of the update screen
608 Update request does not have 'init' status
609 Make a selection
610 No error found when running update request
611 The conditions can only be changed with restrictions
612 No ABAP/4 short dump exists
613 Invalid VBPHASE &
614 Update status & not allowed for normal update
615 No program reference exists
616 No update parmeters available
617 No update request found (key: &)
618 Error reading update request (Key: &)
619 Update module not found (Key:&, UD-ID: &)
620 Error reading an update module (Key:&, UB-ID: &)
621 This update request cannot be carried out retrospectively
622 No update server active
623 No list of servers received
624 Update delayed. Please wait
625 Update delayed
626 The update data cannot be displayed (RC: &)
627 Currently processing batch input sessions
628 Session not processed due to batch input reorganization
629 Language environment cannot be configured for language &
630 Invalid session number received
631 Maximum number of SAP gateways reached
632 The remote LU was not specified
633 Maximum number of CPIC clients reached
634 Invalid TP name
635 Partner program fork unsuccessful
636 Invalid NI handle
637 rexec unsuccessful
638 Remote TP start failed
639 Datagram send failed
640 Internal SAP gateway error
641 Fatal error, session terminated
642 Error during initialization, session terminated
643 Error receiving data, session terminated
644 Error sending data, session terminated
645 Internal TSKH error, session terminated
646 No free block found, session terminated
647 Roll-in failed, session terminated
648 Roll-out failed, session terminated
649 SAP commit failed, session terminated
650 Semaphore operation failed, session terminated
651 Signal received, mode cancelled
652 Work process automatically restarted
653 No connection to database, session terminated
654 Roll initialization failed
655 Page initialization failed
656 OS-specific initialization failed
657 SAP initialization failed
658 SAP rollback failed
659 Recursive SAP exit call
660 Session was deleted by system administrator
661 Terminal/message output overflow
662 CPIC output overflow
663 Work process restarted; session terminated
664 Unknown host
665 Unknown service
666 Error occurred in the SAP network interface
667 Exec failed
668 R/2 was restarted (log on again)
669 Symbolic destination is too long
670 No more side info entries available
671 Internal session terminated with a runtime error & (see ST22)
672 SAP system login failed
673 IMS error occurred
674 Outstanding terminal data not processed
675 Error occurred in the update control
676 User not authorized to start the program on the host
677 Timeout while waiting for a connection to be established
678 Transaction program was registered
679 Transaction program not registered
680 Session transferred to another terminal
681 Session terminated
682 Server shutting down
683 LEAVE TO TRANSACTION is not permitted within an AUTO-ABAP
684 Auto-ABAP had to be cancelled because of process termination
685 Transaction from "PRIV" session reset after timeout
686 Function not possible in a captured session
687 Modus removed after work process reconnect
688 Reserved for task handler
689 Reserved for task handler
690 Server & is not active - action cannot be executed
691 System message added
692 System message changed
693 System message deleted
694 All system messages deleted
695 Position the cursor correctly
696 Specify a system message
697 & is in the past
698 System message was not changed
699 No authorization to create, change or delete system messages
700 rvin: Company code & not in table 001
701 rvin: Argument & not in table 182f
703 rvin: Argument & not in table 001g
704 Delete time is before expiration time
705 rvin: Argument & not in table 182h - individual header
706 rvin: Argument & not in table 030
707 rvin: Error during Init rvfp
708 rvin: Duprec -buins -
709 rvin: insert -buins - error
710 rvin: Argument & not in table 182h - header totals
711 rvin: Error during read - fatab -
712 rvin: Error during write - fatab -
713 rvin: Argument & not in table 182h
714 rvin: Argument & not in table 001w
715 rvin: Argument & not in table 182h - sales deduction
716 rvin: Number of items greater than 250
717 rvin: Account & does not exist
718 rvin: Company code & not opened
719 No RFC authorization for user &.
720 Registration of transaction program not allowed
721 SNC deactivated, request refused
722 SNC required for all connections
723 SNC name not set
724 SNC server name not set
725 SNC not supported for protocol
726 Gateway ist not connected to the local SAP system
727 SNC required for these connections
728 Work process & is already locked
729 &3 &1 &2 is created
730 rvrf: Write error BTCI0S
731 rvrf: Open error BTCI0S
732 rvrf: Error in BTCIO (CNIG)
733 rvrf: Error in BTCIO (LODI)
734 rvrf: Error in BTCIO (ENIG)
735 Your system has not been installed correctly
736 SNC conversion incomplete. & & & &
737 Application: System administration Secure Network Communication (SNC)
740 No order type authorization (VAUBE)
741 No delivery note authorization (LFABE)
742 No invoice type authorization (RGABE)
743 No maintenance authorization (PCABE $ )
744 No maintenance authorization (PCLBE $ )
745 No printer authorization (SPLBE)
750 Special stock: Segment does not exist
751 Special stock: Quantity lock table full
752 Transaction code not found
760 Gateway could not open sideinfo file
761 Communication system error (Receive failed, partner ended?)
762 SNC_LIB not defined in command line nor in environment
763 SNC_NAME not defined in command line nor in environment
764 Invalid SNC handle
765 SNC not activated for this connection
766 General SNC error
767 SNC required for this connection
768 No user exists with SNC name "&"
769 SNC name for RFC/CPIC does not exist in any ACL
770 SNC name of the partner system not in ACL system
771 SNC name and specified user/client do not match
772 Syntax error in received X.509-client certificate (base64-coding)
773 Received X.509-client certificate not passed by ITS
774 Received X.509-client certificate not passed by HTTPS
775 No suitable SAP user found for X.509-client certificate
776 Several suitable SAP users found for X.509-client certificate
777 No suitable SAP user found for external user identity
778 Several suitable SAP users found for external user identity
779 Could not find a suitable SAP user for the SNC name of the caller
780 System found several suitable SAP users for the SNC name of the caller
781
782
783
784
785
786
787 Caution: Certificate-based logon is rule-based
788 Number of failed password logon attempts: & (see long text)
789
790 Password was not used for a long period and therefore deactivated
791 Password can be changed in & days at the earliest
792 System is not available at this time (Status: "Stopped")
793 System is generally not available at this time (maintenance only)
794
795
796
797 Log on using SSO ticket denied due to security guideline
798 Ticket contains different ABAP user ID (Re-Authentization)
799 Ticket contains no / an empty ABAP user ID (see note 1159962)
800 Enter a version description
801 Setting & successfully saved
802 The basic setting cannnot be deleted
803 Settings throughout the system have been activated
804 No authorization to process settings valid throughout the system
805 Do not hide all columns
806 Select a value in the list box
807 Variant & deleted
808 No system variant exists
809 Variant & does not exist
820 You must define icons in strict ascending order: &
821 Icon name & contains invalid characters
822 The icon name must not contain a space: &
823 Incorrect internal representation of icon &
824 The internal name of icon & contains invalid characters
826 Icon name & has already been used
827 Deleting icons is problematic; see long text
830 Batch input: no authorization to display log &
831 Batch input: no authorization to delete log &
832 Batch input: Session logs are stored in TemSe files
833 Batch input: No authorization to archive log &
834 Batch input: Can only archive TemSe file logs
835 Batch input: No log available to archive
836 Batch input: Cannot open archive file
838 Deletion not possible; a background job still exists for folder &
850 Total size of extended memory
851 Extended memory: high-water mark since startup
852 Extended memory: high-water mark since last query
853 Extended memory: snapshot of fill status
854 Amount of extended memory in user contexts that is active in WPs now
855 Maximum allowed amount of heap memory (abap/heap_area_total)
856 Heap memory: High-water mark since startup
857 Heap memory: High-water mark since last query
858 Currently amount allocated to heap memory
859 Maximum number of extended memory management slots
860 High-water mark of extended memory management slots since startup
861 High-water mark of extended memory management slots since last query
862 Amount currently allocated to EM management slots
863 Current number of WPs in PRIV mode
864 No. of dialog WP restarts (because abap/heaplimit exceeded) since startup
865 No. of batch WP restarts (because abap/heaplimit exceeded) since startup
884 Cusr: Hierarchy error: A preceding level is initial
885 Cusr: Level is numeric
886 Cusr: Number of edit characters and length of mat.no. inconsistent.
887 Cusr: Incorrect mask entry
888 Cusr: Field length in Table CUSR is too long
889 Cusr: No field length entry in table CUSR
890 Cusr: Read error in table CUSR
891 Cusr: No E field exists
892 Cusr: Entry too long
893 Cusr: Project number not numeric
894 Cusr: Project number length exceeded
895 Cusr: No entry made
896 Cusr: Project structure not defined in table 206
897 Cusr: Length of a project level exceeded
898 Cusr: Maximum project level number exceeded
899 Cusr: No entry made
900 Internal error & during database access
901 DB.$: SQL Error $
902 DB.$: No entry for preset key
903 DB.$: No field with names/number $ in $ table
904 DB.$: Table $ not listed in Nametab
905 DB.$: Key already used
906 DB.$: Overlap area to small
907 DB.$: EOS during line/block output
908 DB.$: Lines/block mode already active
909 DB.$: Invalid or missing arguments in the function reference
910 DB.$: Internal required storage not available
911 DB.$: Set/Get: No further entry available
912 DB.$: Set/Get: Maximal amount of cursors reached
913 DB.$: Set/Get: Reference on invalid cursor
914 Decompression: Invalid data format passed
950 Message numbers 950 to 980 reserved for temporary phase for DBERROR
951 DB error: SQL error & occurred
952 DB error: No entry found for specified key
953 DB error: Specified key already used
954 DB error: Internally required storage space not available
955 DB error: Incorrect use of the DB interface
956 DB error: Internal error in DB interface
957 DB error: Working storage area too small
958 DB error: Table & in DB interface is unknown
959 DB error: In Table &, field & is unknown
960 DB error: Cursor is no longer available
961 DB error: Reference to invalid cursor
962 DB error: Access to DB interface unsuccessful
963 DB error: Access to DB interface not allowed
964 DB error: Single record access to table & without primary key
965 DB error: Inconsistency between DB interface and data catalog
966 DB error: Enough memory for table $ in the table buffer
967 DB error00 SAP Message Class - Texte der allgemeinen Basis
Sponsored Links
00 is a standard message class available within your SAP system (depending on your versionand release level). Below is a list of all the messages available for within this class and a link to any long text associated with each message. These messages are very simple to use and can be implemented into your ABAP code using the MESSAGE statement and the following syntax.
MESSAGE I001(00).
Note the value "I" represents an information messsage but can be replaced with E for error, W for warning, S for Status/Success, A for Abend/Termination and X for exit which does not display a message and causes a runtime error. Click here for more information about SAP Messages
Message class details can be viewed directly within your SAP system by entering the object name 00 into the relevant SAP transaction such as SE91 or SE80
Contribute (1 Comment)
Use the comments section below to add any links, information or screen shots that you feel ARE RELEVANT TO THIS MESSAGE CLASS OR ANY OF THE MESSAGES WITHIN IT. THIS COULD INCLUDE issues you have found that cause the messages to appear incorrectly as well as any fixes you have found or relevant SAP OSS notes. This information can then be found quickly, simply by searching on the message class 00
001 &1&2&3&4&5&6&7&8
002 Enter a valid value
003 Message with maximum length and maximum variable parts: & & & & 1234*
004 Memory consumption display switched on
005 Memory consumption display switched off
006 &1 read (&2 lines)
007 &1 is empty
008 Too many nested system menus
009 Incorrect index for screen save stack
010 Error during semaphore operation: &
011 Decimal places are not permitted
012 All buffers were reset
013 Menu transaction cannot be called via transaction parameter
014 Error generating screen texts
015 Field value is negative (sign cannot be displayed)
016 Too many nested subscreens
017 Invalid data type for field &3 on screen &1 &2
018 COMMIT successful
019 Error in SSTEP loop definition -> (screen error)
020 The field value is too large and cannot be displayed
021 The field is too short
022 Storage chain destroyed by RSTG function
023 Incorrect call of RSTG
024 Roll area too small
025 RSTG chain damaged
026 MAIN step EOD missing -> (screen error)
027 The ABAP/4 field data type is incorrect
028 With bit strings, only '0' and '1' are allowed
029 Error loading screens: No end label
030 & not allowed in subscreens (screen: & &)
031 Transaction & is unknown
032 The ABAP/4 field is too short
033 Debugging mode is on
034 Transaction & is locked
035 Unable to set parameter (ID &, length &)
036 Cannot reset the entry
037 Saving not possible (check the key fields)
038 The screen cannot be saved
039 Screen generation & &: Incorrect DYNP version
040 Error in 'Waiting for RFCDIA'
041 Syntax error in screen & &
042 Data has been reset
043 Program error with EXIT FROM LOOP: No loop active
044 & buffer reset
045 Program "&": Screen source "&" is missing
046 Error loading screen source: & &
047 Screen & & could not be generated
048 Screen comparison & &: incorrect ABAP timestamp
049 Mo message ID defined for module pool &
050 Error formatting terminal data, transaction terminated
051 More than 1 selection field is set
052 Enter a numeric value
053 Invalid SAPGUI logon data
054 Check time format
055 Fill in all required entry fields
056 Too much data held (execute "Delete Data")
057 Entry & & & exists (entry is correct)
058 Entry & & & does not exist in &4 (check entry)
059 The entry value is too large (max. 255)
060 Table & does not exist in screen & &
061 The input value is too large (max 32767)
062 CALL SCREEN not allowed in subscreens (program error)
063 Screen & & must be an Include screen (screen error)
064 Invalid date
065 Enter date in the format &
066 Screen & & must not be an Include screen
067 The RAW field is too long (it cannot be displayed)
068 Error in the hexadecimal input: odd number of digits
069 Specify time within permitted value range
070 Incorrect hexadecimal digit
071 Function TESTEN DYNPRO not currently possible (try again)
072 Memory low. Leave the transaction before taking a break!
073 Set SCREEN_COMPRESS &1
074 Screen display in file &1.
075 No matchcode selection was made
076 HOLD_MODE &1, trace_id: &2
077 Input field contains prohibited characters. (Already replaced)
078 DFIES data incorrect in field &-&
079 Internal error with matchcode selection (notify person responsible)
080 Conflict check &
081 Nested call of PERFORM ON COMMIT: & & & &
082 Cannot display screen with plug-ins
083 CALL SUBSCREEN: & & &
084 Invalid field format (screen error)
085 COMMIT WORK during ON COMMIT or ON ROLLBACK
086 ROLLBACK WORK during ON COMMIT or ON ROLLBACK
087 Entered value is too large (Max = 2147483647)
088 Input must be in the format &
089 Entry too long (enter in the format &)
090 Screen & & is too large
091 You cannot specify the codepage & in SAPLogon
092 Entry is too long for the field
093 Data was set
094 Data was held
095 No field was set
096 No field was held
097 Internal table & does not exist or is empty
098 Program error with LOOP AT int. tab: FROM greater than TO
099 Field after FROM, TO or CURSOR has incorrect data type
100 Program error with LOOP AT internal table: FROM larger than table end
101 Batch input: Processing mode 'Display errors only' activated
102 Batch input: Processing mode 'Process visibly' activated
103 Int. table & without header line not supported with LOOP AT itab
104 Transaction was exited with function key F3, F12 or F15
105 Transaction restarted by user
106 Error reading log file &
109 No CHECK type checkbox found
110 Use the most recent SAPGUI version
111 List extract can not be fully displayed
112 Control & & does not exist
113 Tab title pushbutton & not assigned to an area
114 Tab control not supported by SAPgui
115 Tab & has no active buttons
116 Controls active, cannot resume
117 Function code of pushbutton & is invalid
118 Screen output area too small
119 Protected tab titles are not supported (tab & title &)
120 Table Control &: More than the specified & columns were referenced
121 SAP GUI does not support strings (variable length types)
122 Invalid GUI output data: &1
123 Invalid GUI input data: &1
124 Configuration not possible due to pending entries
125 No field defined for the function code
126 Specify positive values only
127 This function is not possible
128 Screen error during matchcode processing (notify person responsible)
129 Matchcode object not specified
130 Current RFC connection does not permit you to execute this function
131 "Skip Initial Screen" is not permitted for transaction &
132 Function not possible in update debugging
133 Function not possible in background debugging
134 Maximum number of sessions reached
135 Maximum number of sessions reached in the system
136 Value of SET PARAMETER ID & has the length 0
137 Logons from external user authentication are generally rejected
138 Logons from X.509 client certificate are generally rejected
139 This system does not let you log on using a password
140 This system rejects all logons using SSO tickets
141 The system is unable to interpret the SSO ticket received
142 Cannot check issuer of SSO ticket
143 Issuer of SSO ticket is not authorized
144 System received an expired SSO ticket
145 This SSO ticket has already been used (security protection)
146 Error in configuration of SAP logon tickets
147 Assertion ticket received is not meant for this system
148 User account not in validity date
149 No authorization for object &
150 You are not authorized to use function &
151 Program error. Please notify the person responsible
152 Name or password is incorrect (repeat logon)
153 Enter a new password
154 No valid license installed (no logon possible)
155 User already logged on at another terminal
156 Log on with a dialog user
157 User not authorized. Session terminated
158 User is locked. Please notify the person responsible
159 The logon language does not match system code page &
160 Auth. check > Long text (tr. & object &)
161 CPIC is not allowed in this system
162 >>>>>>>>>>> & &
163 Client & is not available in this system
164 Error creating authorization buffer (notify the person responsible)
165 Maximum number of users in the system reached
166 The client is currently locked against logon
167 Screen &1: DDIC structure &2 was modified during the run
169 License expiration date: & (in & days)
170 No logon possible (no hw ID received by mssg server)
171 Select one of the installed languages
172 You are not authorized to use Transaction &
173 Enter first and last name
174 No authorization to open the X.25 connection
175 Logon refused (license has expired)
176 Logon refused (license data improperly modified)
177 Logon refused (valid license not installed)
178 Logon refused (license key invalid)
179 Logon not possible (error in license check)
180 You can change your password only once a day
181 The new and old passwords must have at least & different characters
182 The initial password has expired (request a new one)
183 Choose another password (this password is invalid)
184 The passwords specified must be identical
185 Use only characters from the 'syntactical character set'
186 New password cannot begin with '?' or '!'
187 Password is not long enough (minimum length: & characters)
188 The first three characters of the password must all be different
189 The first three characters must not be part of the user name
190 You can no longer change the password
191 Program error occurred (notify SAP)
192 Password changed
193 Choose a password that is different from your last & passwords
194 Password is in exception table
195 The input field contains prohibited characters (already deleted)
196 No valid GUI codepage for language & (system codepage &)
197 You have no password; you cannot log on using a password
198 This operation was canceled because the user has no password
199 You have no authorization to administer passwords remotely for user &1
200 Password logon no longer possible - too many failed attempts
201 Exit status unknown (abend)
202 CALL SCREEN (not modal) in modal dialog box not allowed
203 Debugging is only possible with a "Dialog" type user
204 Presentation ended
205 Error in APPC CONN headers
206 Invalid log version
207 APPC connection type '&' not supported
208 &
209 Error creating APPC message
210 Error in APPC message
211 No CUA area available
212 Connection terminated
213 CPIC server sending screen & &. Cancelled
214 Error in RCUI slave. A start UI mode/BI mode is missing
215 Error in RCUI slave. ThCtrlGetInBuf ends with rc=&
216 Error in RCUI slave. Internal buffer for data is too small
217 Error in the RCUI Slave. Error while receiving GUI data
218 & is not currently supported
219 ABAP variable & does not exist
220 ABAP table & does not exist
221 Communication terminated
222 Gateway memory bottleneck
223 Connection to a CPIC program terminated (read failed)
224 CPIC program connection ended (write error)
225 Unknown CPIC function
226 Invalid conversation ID
227 SAP gateway process terminated
228 Storage error in SAP gateway
229 Storage error in SAP gateway
230 No free connection available. Please try again later
231 No free SAP gateway processes. Please try again later
232 Failed to start SAP gateway process (gwwp)
233 Incorrect communication type
234 Failed to establish connection to CPIC program
235 Connection no longer exists in internal connection table
236 SAP gateway connection failed. Is SAP gateway started?
237 Connection to SAP gateway terminated (Is SAP gateway closed?)
238 SAP gateway communication error (Is SAP gateway closed?)
239 SAP gateway communication error (Is SAP gateway closed?)
240 Invalid length (check parameters)
241 Function is invalid in this environment
242 Timeout during connection setup. Please check partner availability
243 Failed to connect to SAP system (parameters exist?)
244 Connection closed by partner
245 Insufficient gateway memory (Try again later)
246 Incorrect version of CPIC program (check the installation)
247 Remote or local gateway not running, Note 1138406
248 Failed to read table TXCOM.
249 Active connection table is full. Please try again later
250 No CUA area available
251 No storage of class SHORT available
252 Entry cannot be selected
253 Invalid OK command
254 Invalid menu code
255 Function code cannot be selected
256 Choose a valid function
257 No menu entries found
258 Unknown event
259 DB cursor cannot be set
260 Invalid "fastpath"
261 Storage area for GUI status & & too small
262 No status entry found for $ $
263 CUA: (Function sets missing)
264 Status &2 of the user interface &1 missing
265 CUA: (F keys missing)
266 CUA: (F keys missing)
267 CUA: (Texts missing)
268 CUA: (Set of active functions missing)
269 Help function is only active after logon
270 A status cannot be set in a sub-screen. (Screen : & &)
271 No memory available for CUA interface
272 Insufficient memory: Include menu & & cannot be included
273 & is not defined in the profile
274 Error in call parameters
275 Unable to reconnect from &1 to &2
276 DB connection to replacement DB server initialized
277 Error in call DB_FUNCTION
279 Password cannot be longer than 8 char. and cannot contain lower case
280 The password must contain at least & digits (0-9)
281 The password must contain at least & letters (A-Z, a-z)
282 The password must contain at least & special characters
283 The password must contain at least & lowercase characters (a-z)
284 The password must contain at least & uppercase characters (A-Z)
285 Service request not possible, function module &1 not available
286 ABAP table & cannot be extended
287 Set parameter ID &... is too long
288 Internal memory overflow at set parameter ID &
289 System error "&" received in RCUI slave
290 Enter your old password
291 Your password has been deactivated
292 Password rules have been tightened; change of password required
293 Both passwords must be identical
294 The entered password is not downward compatible (see long text)
295 Communication error, Transaction &, Number in folder &
296 Service request not possble, method &1=>&2 not available
297 Field & changed: & (previously: &)
298 Formatting error in the field &; see next message
299 Could not release folder &, since it still contains a background job
300 Session & is being processed by user & in mode & on server &
301 Position the cursor on a line in the list
302 Invalid date &
303 You cannot process more than one session with this function
304 & session(s) deleted &
305 & session(s) & &
306 No session found with status "New" or "Error"
307 Error in & of session & &
308 The batch input session is empty
309 The requested session cannot be processed
310 Choose a processing type
311 & session(s) selected
312 The requested session is locked
313 & session(s) and log(s) deleted &
314 & is not currently supported
315 & logs were deleted
316 Screen source not available: & &
317 Unable to read log list
318 Log list is empty
319 Unable to find log list &
320 Session destroyed, cannot be processed
321 & logs were selected
322 Session & is being processed by user &
323 You cannot process more than one log with this function
324 No log exists
325 No log list available
326 Session & released for processing
327 Status cannot be changed
328 The required block does not exist
329 &, create session .&. not allowed, as last session is still active
330 &, session not opened
331 &, internal data area for screen .&1&2. too small
332 &, queue error at &. Please check the system log
333 &, client .&. is invalid
334 &, group .&. is invalid
335 &, lock date .&. is invalid
336 &, user .&. is invalid
337 &, destination .&. is invalid
338 &, Transaction code .&. is invalid
339 &, screen .&&. is invalid
340 Batch input queue error. Please check the system log
341 Runtime error & has occurred
342 Batch input internal error. Please check the system log
343 Cursor field &1&2 does not exist in the screen
344 No batch input data for screen & &
345 Processing of batch input session completed
346 Field name & not valid in the batch input data
347 Field &1&2 is not an input field
348 Field &1&2 input value is longer than screen field
349 Field &1&2 does not exist in the screen &3 &4
350 Input value for OK code is too long
351 & session contents passed to spool & for printing
352 "LEAVE TO TRANSACTION" & is not allowed in batch input
353 Session & cannot be protected (error in locking operation)
354 OK code & is not allowed in batch input
355 Transaction was processed successfully
356 Transaction was deleted from batch input session
357 Transaction error
358 Field &1&2 not found in loop of screen &3 &4
359 The transaction was terminated by the user
360 Queue error, function: & RC & SQL-RC &
361 Error in transaction data
362 Error in screen data
363 & transactions read
364 & transactions processed
365 & transactions with errors
366 & transactions deleted
367 Screen deleted from batch input session
368 &1 &2
369 Screen is not required
370 Processing statistics
371 Length error in transaction data
372 Length error in screen data
373 Update error, transaction &, no. in session &
374 &, separation indicator .&. is invalid
375 &, field table is invalid
376 &, no transaction created yet
377 Update error, transaction &
378 Start screen does not exist in batch input data
379 Screen & & is too large for internal batch input area
380 Processing not possible (session is locked)
381 Batch input session deleted
382 Batch input processing ended
383 Batch input processing cancelled
384 Start of session reached
385 End of session reached
386 Log for session & deleted
387 Error deleting log &
388 & session(s) transferred to background processing
389 No authorization for reorganizing sessions and logs
390 Unable to schedule session &.
391 No authorization for processing session & online
392 No authorization for processing session & in background
393 No authorization for release of session &
394 No authorization for locking/unlocking session &
395 No authorization for deleting session &
396 No authorization for analyzing session &
397 Batch input is not active
398 & & & &
399 Batch input: Unknown return code
400 No free dialog process available
401 Maximum number of internal sessions reached
402 Error establishing CPIC connection
403 Eye catcher of the number range buffer corrupted
404 Error setting up a remote session
405 Active program is being terminated (please wait)
406 Active program could not be terminated
407 You cannot take over another user's session
408 Old session could not be adopted
409 Position the cursor on a column
410 Function not currently supported
411 Maximum number of sessions reached
412 Session & is still active
413 Session & already exists
414 Sessions locked for users
415 Invalid session no. &
416 Session & does not exist
417 No sessions available. User may have been deleted
418 TSKH
419 Work process & locked ( & )
420 Work process & released ( & )
421 Roll-free error
422 Pag-free error
423 Shared memory error
424 Semaphore lock error
425 Semaphore release error
426 Roll-in error
427 Session ended
428 Reserved for task handler
429 Log off via the System menu or by entering /nend in the command field
430 Timeout for setting up an asynchronous dialog
431 Invalid output to terminal from background processing
432 No authorization for user administration
433 No authorization for process/program administration
434 No authorization for update administration
435 &1&2&3
436 The host name cannot contain blanks
437 The host name is too long (max. length: & bytes)
438 There is already an entry with host name &
439 Save your data or cancel
440 Unpermitted data volume received
441 CPIC function not allowed
442 Timeout during connection setup
443 Failed to connect to SAP system
444 Connection terminated
445 No memory available
446 Update debugging only possible in same client
447 No authorization for administering the number range buffer
448 No error found in number range buffer check
449 Number range buffer error corrected
450 No memory available
451 Failed to open side information file (check the installation)
452 Communication system error (tp_start function failed)
453 Conversation not initialized (CMINIT/CMACCP called?)
454 Communication system error: getlu failed. Is LU correct?
455 System call error: signal function failed
456 Timeout during connection setup (check that partner exists)
457 Communication system error (allocate failed). Please check partner
458 Communication system error: send failed
459 Communication system error: prepare failed
460 Communication system error: flush failed
461 Communication system error (Receive failed, partner ended?)
462 No argument for ACCEPT in argument vector
463 Communication system error: remote allocate failed
464 Communication system error: deallocate failed
465 Communication system error: tp_end failed
466 Max. number of connections reached. Retry later
467 Communication system error: snaopen failed. Check LU
468 Communication system error: snactl failed
469 No flush on IBM
470 Communication system error: snaclse failed
471 CPIC status error (check CPIC program)
472 No side info entry found (check side info or destination)
473 No conversation found. Check conversation ID
474 Connection deleted by administrator
475 Time limit exceeded, connection terminated
476 No partner program found (check installation)
477 Communication system error: confirm failed
478 Communication system error: confirmed failed
479 No value for GWHOST side info entry (check side info)
480 No value for GWSERV in side info entry (check side info)
481 No value for PROTOCOL in side info entry (check side info entry)
482 No value for LU in side info entry (check side info)
483 No value for TP in side info entry (check side info)
484 SAP gateway connection failed. Is SAP gateway started?
485 System call error: gethostname failed. Please check installation
486 Function SAP_CMACCP has not yet been executed
487 No program name found in argument vector
488 No host found in argument vector
489 No service found in argument vector
490 No conversation ID found in argument vector
491 Invalid parameter value
492 Communication system error: function LU62CVCT failed
493 Communication system error: function LU62ATTCH failed
494 No CPIC conversion table found
495 Error in CPIC conversion table
496 Error in modification values for CPIC conversion table
497 Unable to determine host address: NiHostToAddr failed
498 Unable to determine host from address: NiAddrTo Host failed
499 THOST table read failed
500 Entry & in work area & with language key & not supported
501 Job & is not currently scheduled
502 No log entries exist for job &
503 Log for job & cannot be &
504 Recording for job & deleted
505 Choose a processing option
506 Choose one object type only
507 Choose a job first
508 No job matches the selection criteria
509 No log exists for job &. Check the system log
510 Job log list cannot be read
511 Jog log list is empty
512 Log entries were deleted for background job &
513 Failed to fetch parameter &
514 No background jobs are scheduled
515 Job sends screen & &
516 Job started
517 Job finished
518 Job cancelled
519 Position the cursor on a valid line
520 No entries available
521 No log entries exist for job &
522 There are currently no schedules due for release
523 Schedule for job & has already been released
524 Schedule for job & released
525 Start date is in the past
526 Job & is already finished
527 Job & is already active
528 You are not authorized to display the selected jobs
529 The description of step & cannot be read
530 Previous job & does not exist
531 Specify a complete start time/date
532 Specify only one start time/date
533 You have no & authorization for the steps of job &
534 Job & is currently active, so the selected function cannot be performed
535 "LEAVE TO TRANSACTION" is not allowed in a background job
536 & of job log failed
537 Job log is &
538 Specify a previous job
539 Specify a start time/date
540 Choose only one start time/date
541 Program & does not exist
542 Specify a program
543 Test: TBTCR updated
544 Test: SY-BATCH indicates background processing
545 Test: SY-BATCH indicates no background processing
546 Job & is currently being edited. Repeat &
547 Job & has now been deleted
548 & of job & failed. Incorrect lock operation
549 Job & is flagged as 'not executable'
550 Step & started (program &, variant &, user ID &)
551 Selected job contains no steps
552 Select an appropriate job
553 The selected job contains no variants
554 Job also cancelled due to process termination. See the system log
555 Program & cannot be scheduled
556 Job & was &
557 You have no & authorization for job &. Please see the system log
558 Error at & of job &. Please see the system log
559 Internal error at & of job &. Please see the system log
560 Logon of user & in client & failed when starting a step
561 Job & is not periodic
562 Job & contains no &
563 Select an appropriate previous job
564 Job cancelled after system exception ERROR_MESSAGE
565 Job & contains only one step (delete the entire job)
566 Specify a time frame
567 No authorization for displaying the job log for the selected job
568 No list exists for job &
569 Flagged jobs deleted
570 & jobs have been flagged again (total flagged: &)
571 Only 1 job was flagged again (total flagged: &)
572 Job & contains no steps
573 No authorization for displaying lists from the selected jobs
574 Job cancelled due to system shutdown
575 & jobs have been deleted
576 Of the & jobs selected, & were not deleted
577 Selected list no longer exists in the spool
578 Internal report for job & has already been deleted
579 No list exists for the selected step
580 Total & & &
581 & & deleted
582 & & could not be deleted
583 No & were selected
584 Block marking has begun
585 Flags deleted during Goto
586 The scheduling of job & was saved
587 Batch request for job & failed. Please see the system log
588 Deatils about latest start date are not complete
589 Latest start date is before the start date
590 Latest start date and start date are more than 1 year apart
591 Invalid variant &
592 No authorization for displaying authorizations of user &
593 At the start of a job step: Unable to set the code page (language)
594 Job &1 (ID number &2) terminated [User &4:&3]
595 500-599 reserved for batch processing
596 500-599 reserved for batch processing
597 500-599 reserved for batch processing
598 500-599 reserved for batch processing
599 500-599 reserved for batch processing
600 Failed to insert update header
601 Failed to read update header
602 Dump in update
603 Commit during update start failed
604 Failed to read update module header
605 Failed to change update module header
606 Memory error during update
607 No access to working memory of the update screen
608 Update request does not have 'init' status
609 Make a selection
610 No error found when running update request
611 The conditions can only be changed with restrictions
612 No ABAP/4 short dump exists
613 Invalid VBPHASE &
614 Update status & not allowed for normal update
615 No program reference exists
616 No update parmeters available
617 No update request found (key: &)
618 Error reading update request (Key: &)
619 Update module not found (Key:&, UD-ID: &)
620 Error reading an update module (Key:&, UB-ID: &)
621 This update request cannot be carried out retrospectively
622 No update server active
623 No list of servers received
624 Update delayed. Please wait
625 Update delayed
626 The update data cannot be displayed (RC: &)
627 Currently processing batch input sessions
628 Session not processed due to batch input reorganization
629 Language environment cannot be configured for language &
630 Invalid session number received
631 Maximum number of SAP gateways reached
632 The remote LU was not specified
633 Maximum number of CPIC clients reached
634 Invalid TP name
635 Partner program fork unsuccessful
636 Invalid NI handle
637 rexec unsuccessful
638 Remote TP start failed
639 Datagram send failed
640 Internal SAP gateway error
641 Fatal error, session terminated
642 Error during initialization, session terminated
643 Error receiving data, session terminated
644 Error sending data, session terminated
645 Internal TSKH error, session terminated
646 No free block found, session terminated
647 Roll-in failed, session terminated
648 Roll-out failed, session terminated
649 SAP commit failed, session terminated
650 Semaphore operation failed, session terminated
651 Signal received, mode cancelled
652 Work process automatically restarted
653 No connection to database, session terminated
654 Roll initialization failed
655 Page initialization failed
656 OS-specific initialization failed
657 SAP initialization failed
658 SAP rollback failed
659 Recursive SAP exit call
660 Session was deleted by system administrator
661 Terminal/message output overflow
662 CPIC output overflow
663 Work process restarted; session terminated
664 Unknown host
665 Unknown service
666 Error occurred in the SAP network interface
667 Exec failed
668 R/2 was restarted (log on again)
669 Symbolic destination is too long
670 No more side info entries available
671 Internal session terminated with a runtime error & (see ST22)
672 SAP system login failed
673 IMS error occurred
674 Outstanding terminal data not processed
675 Error occurred in the update control
676 User not authorized to start the program on the host
677 Timeout while waiting for a connection to be established
678 Transaction program was registered
679 Transaction program not registered
680 Session transferred to another terminal
681 Session terminated
682 Server shutting down
683 LEAVE TO TRANSACTION is not permitted within an AUTO-ABAP
684 Auto-ABAP had to be cancelled because of process termination
685 Transaction from "PRIV" session reset after timeout
686 Function not possible in a captured session
687 Modus removed after work process reconnect
688 Reserved for task handler
689 Reserved for task handler
690 Server & is not active - action cannot be executed
691 System message added
692 System message changed
693 System message deleted
694 All system messages deleted
695 Position the cursor correctly
696 Specify a system message
697 & is in the past
698 System message was not changed
699 No authorization to create, change or delete system messages
700 rvin: Company code & not in table 001
701 rvin: Argument & not in table 182f
703 rvin: Argument & not in table 001g
704 Delete time is before expiration time
705 rvin: Argument & not in table 182h - individual header
706 rvin: Argument & not in table 030
707 rvin: Error during Init rvfp
708 rvin: Duprec -buins -
709 rvin: insert -buins - error
710 rvin: Argument & not in table 182h - header totals
711 rvin: Error during read - fatab -
712 rvin: Error during write - fatab -
713 rvin: Argument & not in table 182h
714 rvin: Argument & not in table 001w
715 rvin: Argument & not in table 182h - sales deduction
716 rvin: Number of items greater than 250
717 rvin: Account & does not exist
718 rvin: Company code & not opened
719 No RFC authorization for user &.
720 Registration of transaction program not allowed
721 SNC deactivated, request refused
722 SNC required for all connections
723 SNC name not set
724 SNC server name not set
725 SNC not supported for protocol
726 Gateway ist not connected to the local SAP system
727 SNC required for these connections
728 Work process & is already locked
729 &3 &1 &2 is created
730 rvrf: Write error BTCI0S
731 rvrf: Open error BTCI0S
732 rvrf: Error in BTCIO (CNIG)
733 rvrf: Error in BTCIO (LODI)
734 rvrf: Error in BTCIO (ENIG)
735 Your system has not been installed correctly
736 SNC conversion incomplete. & & & &
737 Application: System administration Secure Network Communication (SNC)
740 No order type authorization (VAUBE)
741 No delivery note authorization (LFABE)
742 No invoice type authorization (RGABE)
743 No maintenance authorization (PCABE $ )
744 No maintenance authorization (PCLBE $ )
745 No printer authorization (SPLBE)
750 Special stock: Segment does not exist
751 Special stock: Quantity lock table full
752 Transaction code not found
760 Gateway could not open sideinfo file
761 Communication system error (Receive failed, partner ended?)
762 SNC_LIB not defined in command line nor in environment
763 SNC_NAME not defined in command line nor in environment
764 Invalid SNC handle
765 SNC not activated for this connection
766 General SNC error
767 SNC required for this connection
768 No user exists with SNC name "&"
769 SNC name for RFC/CPIC does not exist in any ACL
770 SNC name of the partner system not in ACL system
771 SNC name and specified user/client do not match
772 Syntax error in received X.509-client certificate (base64-coding)
773 Received X.509-client certificate not passed by ITS
774 Received X.509-client certificate not passed by HTTPS
775 No suitable SAP user found for X.509-client certificate
776 Several suitable SAP users found for X.509-client certificate
777 No suitable SAP user found for external user identity
778 Several suitable SAP users found for external user identity
779 Could not find a suitable SAP user for the SNC name of the caller
780 System found several suitable SAP users for the SNC name of the caller
781
782
783
784
785
786
787 Caution: Certificate-based logon is rule-based
788 Number of failed password logon attempts: & (see long text)
789
790 Password was not used for a long period and therefore deactivated
791 Password can be changed in & days at the earliest
792 System is not available at this time (Status: "Stopped")
793 System is generally not available at this time (maintenance only)
794
795
796
797 Log on using SSO ticket denied due to security guideline
798 Ticket contains different ABAP user ID (Re-Authentization)
799 Ticket contains no / an empty ABAP user ID (see note 1159962)
800 Enter a version description
801 Setting & successfully saved
802 The basic setting cannnot be deleted
803 Settings throughout the system have been activated
804 No authorization to process settings valid throughout the system
805 Do not hide all columns
806 Select a value in the list box
807 Variant & deleted
808 No system variant exists
809 Variant & does not exist
820 You must define icons in strict ascending order: &
821 Icon name & contains invalid characters
822 The icon name must not contain a space: &
823 Incorrect internal representation of icon &
824 The internal name of icon & contains invalid characters
826 Icon name & has already been used
827 Deleting icons is problematic; see long text
830 Batch input: no authorization to display log &
831 Batch input: no authorization to delete log &
832 Batch input: Session logs are stored in TemSe files
833 Batch input: No authorization to archive log &
834 Batch input: Can only archive TemSe file logs
835 Batch input: No log available to archive
836 Batch input: Cannot open archive file
838 Deletion not possible; a background job still exists for folder &
850 Total size of extended memory
851 Extended memory: high-water mark since startup
852 Extended memory: high-water mark since last query
853 Extended memory: snapshot of fill status
854 Amount of extended memory in user contexts that is active in WPs now
855 Maximum allowed amount of heap memory (abap/heap_area_total)
856 Heap memory: High-water mark since startup
857 Heap memory: High-water mark since last query
858 Currently amount allocated to heap memory
859 Maximum number of extended memory management slots
860 High-water mark of extended memory management slots since startup
861 High-water mark of extended memory management slots since last query
862 Amount currently allocated to EM management slots
863 Current number of WPs in PRIV mode
864 No. of dialog WP restarts (because abap/heaplimit exceeded) since startup
865 No. of batch WP restarts (because abap/heaplimit exceeded) since startup
884 Cusr: Hierarchy error: A preceding level is initial
885 Cusr: Level is numeric
886 Cusr: Number of edit characters and length of mat.no. inconsistent.
887 Cusr: Incorrect mask entry
888 Cusr: Field length in Table CUSR is too long
889 Cusr: No field length entry in table CUSR
890 Cusr: Read error in table CUSR
891 Cusr: No E field exists
892 Cusr: Entry too long
893 Cusr: Project number not numeric
894 Cusr: Project number length exceeded
895 Cusr: No entry made
896 Cusr: Project structure not defined in table 206
897 Cusr: Length of a project level exceeded
898 Cusr: Maximum project level number exceeded
899 Cusr: No entry made
900 Internal error & during database access
901 DB.$: SQL Error $
902 DB.$: No entry for preset key
903 DB.$: No field with names/number $ in $ table
904 DB.$: Table $ not listed in Nametab
905 DB.$: Key already used
906 DB.$: Overlap area to small
907 DB.$: EOS during line/block output
908 DB.$: Lines/block mode already active
909 DB.$: Invalid or missing arguments in the function reference
910 DB.$: Internal required storage not available
911 DB.$: Set/Get: No further entry available
912 DB.$: Set/Get: Maximal amount of cursors reached
913 DB.$: Set/Get: Reference on invalid cursor
914 Decompression: Invalid data format passed
950 Message numbers 950 to 980 reserved for temporary phase for DBERROR
951 DB error: SQL error & occurred
952 DB error: No entry found for specified key
953 DB error: Specified key already used
954 DB error: Internally required storage space not available
955 DB error: Incorrect use of the DB interface
956 DB error: Internal error in DB interface
957 DB error: Working storage area too small
958 DB error: Table & in DB interface is unknown
959 DB error: In Table &, field & is unknown
960 DB error: Cursor is no longer available
961 DB error: Reference to invalid cursor
962 DB error: Access to DB interface unsuccessful
963 DB error: Access to DB interface not allowed
964 DB error: Single record access to table & without primary key
965 DB error: Inconsistency between DB interface and data catalog
966 DB error: Enough memory for table $ in the table buffer
967 DB error: Not enough storage space for Table & in table buffer
968 DB error: Data records of the result in primary key sorting
969 DB error: SQL error & during & access to &
970 DB error: SQL error & during & access
971 DB error: SQL error occurred
972 DB error: SQL error during logon to the data base
973 DB error: SQL error during logoff from the data base
974 DB error: SQL error during data base ROLLBACK
975 DB error: SQL error during data base COMMIT
976 DB error: Error during synchronous matchcode maintenance
980 VB module contains no data
999 Table extension for compression successful
DEE KOPurchasing organization
DEL IFVendor
DEM TTQty reliab., on-time delivery
DES TAStatus information(purchasing)
DEW RTValues (purchasing)
DEZ AECounter (purchasing)
DVA SAMaterial structures (order)
DVB O2Measures: rebate processing
DVD AX_
DVE IFUnits (billing document)
DVF BL_
DVG VL_
DVM VL_
DVS TL_
DVV SAShipping (order)
DVW PFValues, dur., prices (billing) : Not enough storage space for Table & in table buffer
968 DB error: Data records of the result in primary key sorting
969 DB error: SQL error & during & access to &
970 DB error: SQL error & during & access
971 DB error: SQL error occurred
972 DB error: SQL error during logon to the data base
973 DB error: SQL error during logoff from the data base
974 DB error: SQL error during data base ROLLBACK
975 DB error: SQL error during data base COMMIT
976 DB error: Error during synchronous matchcode maintenance
980 VB module contains no data
999 Table extension for compression successful
DEE KOPurchasing organization
DEL IFVendor
DEM TTQty reliab., on-time delivery
DES TAStatus information(purchasing)
DEW RTValues (purchasing)
DEZ AECounter (purchasing)
DVA SAMaterial structures (order)
DVB O2Measures: rebate processing
DVD AX_
DVE IFUnits (billing document)
DVF BL_
DVG VL_
DVM VL_
DVS TL_
DVV SAShipping (order)
DVW PFValues, dur., prices (billing)
- 오늘의 한 줄 -
SAP 은 너무 폐쇠적이다...아놔..
공감과 구독은 저에게 크나큰 힘이 됩니다♡